Monoprice Z-Wave Plus PIR Multi Sensor, Temperature – Humidity – Light

$41.55 (as of October 17, 2017, 9:39 pm)

Multisensor detects motion, temperature, humidity, and light changes using this (PIR) Passive Infrared Motion Detector
Motion Detection: The device send a Z-Wave Plus� signal when motion is detected. When triggered, it can activate various other devices and preform preprogrammed tasks and scenes
Temperature and Humidity Detection: The sensor will automatically report the measured temperature and humidity whenever it changes by a particular amount.

Buy product

Category:

Description

This passive infrared (PIR) sensor detects motion and sends a Z-Wave® trigger signal to the network. It also features temperature, humidity, and light sensors, which will automatically report changes in the conditions and will report the absolute values when queried. It has a tamper-proof switch, which will trigger a Z-Wave signal when the cover is removed. These trigger signals can be used to activate various other devices and perform preprogrammed tasks. This is a security enabled Z-Wave Plus® product and a security enabled Z-Wave gateway/controller must be used to fully utilize this sensor. Motion Detection Temperature Detection Humidity Detection Light Detection Motion Detection: This device uses a passive infrared sensor and sends a Z-Wave Plus® signal when motion is detected within its detection range. It can detect moving objects within line of sight at distances up to 32 feet, away with a field of view up to 120°. This trigger signal can then be used to activate various other devices and perform preprogrammed tasks. Temperature Detection: The sensor will automatically report the measured temperature whenever it changes by a particular amount. By default, it reports every time the temperature changes by 1°C. Humidity Detection: The sensor will automatically report the measured humidity level whenever it changes by a particular amount. By default, it reports every time the humidity level changes by 10%. Light Detection: The sensor will automatically report the measured light level whenever it changes by a particular amount. By default, it reports every time the light level changes by 10%. Additionally, the sensor will automatically report the light level for every 10% decrease from 100%.  Low Power Z-Wave Plus is a low power mesh
Multisensor detects motion, temperature, humidity, and light changes using this (PIR) Passive Infrared Motion Detector
Motion Detection: The device send a Z-Wave Plus� signal when motion is detected. When triggered, it can activate various other devices and preform preprogrammed tasks and scenes
Temperature and Humidity Detection: The sensor will automatically report the measured temperature and humidity whenever it changes by a particular amount.
Light Detection: Automatically report the measured light level whenever it changes by a particular amount. Automatic reporting built-in
Device’s effective operating range works Up to 100ft line of sight; Detects motion up to 32ft line of sight

Reviews

There are no reviews yet.

Be the first to review “Monoprice Z-Wave Plus PIR Multi Sensor, Temperature – Humidity – Light”

Your email address will not be published. Required fields are marked *